Frequently Asked Questions

We use a Caterpillar 140M AWD motor grader. This is a professional-grade machine suited to farm levelling, road construction grading, subdivision work, access road shaping, final trim applications, and large site preparation. Its all-wheel-drive capability supports traction and performance across demanding site conditions, making it a strong option for larger projects where consistent results matter.

Yes. We offer grader hire with GPS or without GPS, depending on the job requirements. GPS grading is generally used for construction and civil projects where set levels and design accuracy are important. For GPS work, the customer must provide the design information required for the job, so we can carry out the grading in line with the supplied plans.

We are mainly hired by road contractors, builders, farms, subcontractors, and industrial or commercial project teams that need reliable grader wet hire with operator. Our work is best suited to clients who need professional grading for roads, subdivisions, farm levelling, industrial pads, access routes, and large site preparation rather than small one-off domestic jobs.

Yes. Farm levelling is one of our key service areas. We are commonly hired to level ground on farms, including preparation work before hot houses and other agricultural improvements. Good farm grading can improve drainage, site usability, and surface consistency, and we focus on delivering practical, accurate work that supports the next stage of the farm project.

Yes. We carry out subdivision grading as part of our broader grading and site preparation service. This can include shaping surfaces, assisting with access routes, trimming levels, and preparing areas for follow-on construction works. Our service is suitable for larger projects where accuracy, communication, and reliable equipment matter.

Usually no. Our service is primarily focused on farms, roadworks, subdivisions, builders, and large industrial or construction-related projects. We generally do not target small homes or typical house-size residential work. In rare cases, a larger residential project may be considered, but only after we speak with you, review the site details, and confirm whether the machine is suitable for the work.

The process is straightforward. You contact us by phone or submit an enquiry with your job details, and we discuss the type of work, timing, location, expected hours, and whether GPS is needed. We then advise availability and confirm whether the project is suitable for our grader wet hire service. Bookings are only confirmed after we speak with you by phone, because we do not automatically confirm online booking requests.

To help us assess your job properly, we need your name, phone number, email address, job location, type of work, expected number of hours, preferred start date, whether GPS is required, and any extra comments about the site. The more clearly you explain the job, the easier it is for us to confirm whether the grader is suitable and how the work can be scheduled.

No. We do not publish hourly hire rates on the website. Pricing depends on the job type, location, expected hours, transport requirements, and site conditions, so the best way to get accurate pricing is to contact us directly. This helps us give you information that reflects the actual project rather than a generic figure that may not apply to your site.

We charge on an hourly hire basis, with minimum hire conditions and transport charges applying. In many cases the minimum charge is 4 hours, although some sites may require a 6-hour minimum depending on project needs and location. Because every site is different, we confirm the applicable terms with you when discussing the job.

Yes. A minimum hire applies. In most cases the minimum charge is 4 hours, although some jobs may be subject to a 6-hour minimum depending on the site. This is important for customers to understand when planning grader work, especially where mobilisation, transport, and access requirements affect the project setup.

Yes. Transport charges apply. Because we provide a specialist grader service for larger sites and projects, transport is an important part of job planning and must be taken into account when scheduling work. We explain this clearly when discussing your booking so you understand the full service arrangement before the job is confirmed.

If the work has already started and rain arrives, a 4-hour charge still applies. This policy helps cover the time, transport, and site commitment already made once the grader and operator are on the job. We always recommend planning grading work around suitable weather conditions, because wet or muddy ground can affect both productivity and site access.

We generally recommend not working when the ground is wet or muddy. Soft conditions can affect grading quality, reduce efficiency, and increase the risk of the machine getting stuck. For the best outcome, sites should be reasonably dry and ready for grading before work begins. If you are unsure about conditions on your site, contact us and we can discuss whether the timing is suitable.

In many cases, yes. For example, on farms or overgrown areas, heavy grass should be cleared before grading so the machine can work effectively and deliver a better result. Site readiness makes a real difference to productivity, finish quality, and how efficiently the grader can complete the work. If you are unsure whether your site is ready, we can discuss the conditions before booking.

For GPS grading work, you must provide the design required for the job. This is especially relevant on construction and civil projects where levels and finished surfaces need to match supplied plans. Once the design is available, we can discuss the job requirements and confirm whether GPS grader hire is the right option for your project.

No. We focus on grading and levelling work, not digging or excavation. That distinction is important because customers often use earthmoving terms broadly, but our core service is motor grader wet hire for shaping, trimming, levelling, and preparing surfaces. If your project mainly requires excavation, trenching, or digging, it may need different machinery.

Our service stands out because we combine a capable Caterpillar 140M AWD grader with decades of operator experience, practical communication, and a strong focus on reliable job delivery. We have grader experience dating back to 1980 and have been operating the business since 2001. We are known for being professional, safe, accurate, easy to deal with, and committed to doing the job properly.

We bring long-term, hands-on grader experience to every project. Our operator experience goes back to 1980, and the business has been established since 2001. That depth of experience matters on real sites, because grading often requires judgment, consistency, and the ability to adapt to site conditions while still working to the required result.

Yes. We are fully insured and operate with a strong focus on safety and professionalism. We can also state that we hold relevant site credentials, including White Card status and VOC verification for grader operation. This gives clients confidence that we understand inducted work environments and the standards expected on construction and project sites.

Yes. We have experience working on inducted project sites and understand the expectations around safety, compliance, and site conduct. For many builders, contractors, and civil clients, this is an important part of choosing a grader hire provider, because they need someone who can work professionally within controlled project environments and communicate clearly throughout the job.

Our grader is best suited to farms, road construction work, subdivision projects, industrial site preparation, large pads, access roads, and other sizeable grading or levelling tasks. It is not marketed as the right fit for small residential house jobs. When customers contact us, we look at the project type, site size, and required outcome to make sure the machine is appropriate.

Yes. Road construction grading is one of the key project types we support. This can include shaping surfaces for roadworks, subdivisions, access roads, and related civil construction tasks where level control, grading accuracy, and dependable machinery are important. If your project needs grader wet hire with operator for roadwork applications, we can discuss the site and scheduling requirements.

Yes. Farm levelling before hot houses is one of the practical agricultural applications we are hired for. In these situations, the goal is usually to create a better prepared surface before the next stage of development begins. Proper grading can improve site usability and help provide a more suitable base for planned farm infrastructure.

Yes. We carry out grading and levelling for large industrial pad preparation and broader site preparation work. This includes projects where a consistent surface, practical access, and reliable machine performance are important. We work with customers who need a professional grader service for larger industrial and construction-related sites rather than small domestic work.

Availability depends on current bookings, site location, and the type of work involved. The fastest way to check is to call us directly, because phone contact is our preferred method and allows us to discuss the job properly. Once we understand the details, we can advise availability and confirm the next steps for booking.

No. Online enquiries and booking requests are not automatically confirmed. We confirm all bookings after speaking with you by phone. This helps us make sure the project details are correct, the machine is suitable, the required hours are understood, and the timing works for both sides before anything is locked in.

We accept cash and bank transfer. Payment arrangements can be discussed when confirming your job so expectations are clear from the start. We keep the process straightforward and professional, which is important for both one-off projects and repeat customers who value clear communication.

We require 24 hours’ notice for cancellations. If a booking is cancelled within 24 hours, transportation charges may still be collected. This policy reflects the time and logistical commitment involved in scheduling grader wet hire and helps protect against last-minute changes after transport and planning have already been arranged.

Calling is the quickest way to get clear answers about availability, job suitability, site readiness, minimum hire, transport, and booking confirmation. Because grader work is often site-specific, a short phone discussion helps us understand what you need and gives you a direct answer from the start. It also helps avoid delays that can happen when important project details are missing from an enquiry.

The best way is to contact us with your job details so we can assess the project based on location, ground conditions, access, work type, size, and timing. Because our service is focused on larger grading and levelling jobs, suitability depends on more than just the suburb or number of hours requested. We would rather have a proper discussion upfront and give you a realistic answer than make assumptions that do not fit the job.

Before contacting us, it helps to know the site location, the type of grading or levelling required, the likely number of hours, your preferred start date, and whether the work involves GPS. If the ground is wet, muddy, or covered in heavy grass, that is also useful to mention because site conditions can affect whether the job is ready to proceed. When you provide complete information early, we can guide you faster and more accurately.

Contractors and farms choose us because they want a grader hire service that is experienced, straightforward, and dependable. We focus on doing the job professionally, communicating clearly, and turning up ready to work with the right machine and operator. For customers managing roadworks, subdivisions, farm levelling, access roads, and industrial site preparation, that kind of reliability matters just as much as the machine itself.